22 jobs found in Monroe, GA

The Patriot missile system is the primary surface-to-air missile used by the military. It requires strong attention to detail and highly skilled individuals to ensure it’s ready at any time. As a Patriot Fire Control Enhanced Operator/Maintainer for the Army National Guard, you will maintain the systems within the Patriot, including the radar set, engagement control station, electronic power plant, antenna mast group, and battle command post. You will also be responsible for identifying, tracking, and combating those identified threats using an advanced interceptor missile capable of destroying enemy air threats at a moment’s notice. Job Duties • Responsible for the movement and placement of the Patriot Fire Control systems in various locations and environments • Operate Patriot Fire Control electronic, hydraulic, and mechanical components • Evaluate intelligence and identify targets; perform real-time status reporting during combat •...

Defend the skies using complex technology as an Air Defense Battle Management System Operator for the Army National Guard. You will primarily be responsible for integrating, operating, and maintaining multiple systems to detect aerial threats and communicate them to your crews. In this role, you will learn how to operate the Sentinel Radar system to provide warning, detection, and protection for armed forces, and will play a vital role in guarding against aerial and space-based attacks. Job Duties • Movement, placement, operation, and maintenance of the Sentinel Radar system in various locations and environments • Establish network interoperability with Allied, Joint, and other Air Defense units • Collect, integrate, and process tactical battlefield information from multiple users and sensors through a network of Army and Joint-service automated battle command systems • Provide airspace situational awareness, deconflict and clear airspace to ensure...

Since the Army National Guard uses a plethora of electronic systems, power is essential to success. As the Power-Generation Equipment Repairer, you’ll supply the power to run virtually every aspect of Army activity whenever and wherever it’s needed. In this specialty, you’ll support military operations day or night by performing preventive maintenance checks on generation equipment, or replace voltage regulators, governors, or circuit cards. You may also adjust frequencies and voltages using technical publications to enhance equipment efficiency. Job Duties • Perform maintenance on tactical utility, precise power-generation sets, internal combustion engines, and associated equipment Some of the Skills You’ll Learn • Generator and powerplant operations • Electrical generation and distribution • Diesel generator operation, disassembly, inspection, and maintenance • Principles of electrical and electronic circuitry...

The Patriot missile system is the primary surface-to-air missile used by the military. It requires strong attention to detail and highly skilled individuals to ensure it’s ready at any time. As a Patriot Fire Control Enhanced Operator/Maintainer for the Army National Guard, you will maintain the systems within the Patriot, including the radar set, engagement control station, electronic power plant, antenna mast group, and battle command post. You will also be responsible for identifying, tracking, and combating those identified threats using an advanced interceptor missile capable of destroying enemy air threats at a moment’s notice. Job Duties • Responsible for the movement and placement of the Patriot Fire Control systems in various locations and environments • Operate Patriot Fire Control electronic, hydraulic, and mechanical components • Evaluate intelligence and identify targets; perform real-time status reporting during combat •...

Defend the skies using complex technology as an Air Defense Battle Management System Operator for the Army National Guard. You will primarily be responsible for integrating, operating, and maintaining multiple systems to detect aerial threats and communicate them to your crews. In this role, you will learn how to operate the Sentinel Radar system to provide warning, detection, and protection for armed forces, and will play a vital role in guarding against aerial and space-based attacks. Job Duties • Movement, placement, operation, and maintenance of the Sentinel Radar system in various locations and environments • Establish network interoperability with Allied, Joint, and other Air Defense units • Collect, integrate, and process tactical battlefield information from multiple users and sensors through a network of Army and Joint-service automated battle command systems • Provide airspace situational awareness, deconflict and clear airspace to ensure...

Since the Army National Guard uses a plethora of electronic systems, power is essential to success. As the Power-Generation Equipment Repairer, you’ll supply the power to run virtually every aspect of Army activity whenever and wherever it’s needed. In this specialty, you’ll support military operations day or night by performing preventive maintenance checks on generation equipment, or replace voltage regulators, governors, or circuit cards. You may also adjust frequencies and voltages using technical publications to enhance equipment efficiency. Job Duties • Perform maintenance on tactical utility, precise power-generation sets, internal combustion engines, and associated equipment Some of the Skills You’ll Learn • Generator and powerplant operations • Electrical generation and distribution • Diesel generator operation, disassembly, inspection, and maintenance • Principles of electrical and electronic circuitry...

Lightweight and highly mobile, the AVENGER is the Army National Guard’s premier shoot-on-the-move air defense weapon. An AVENGER Crewmember operates and maintains this surface-to-air missile system, designed to identify, track, and engage enemy targets like cruise missiles, and low-flying aircraft. The crewmember is responsible for operating and maintaining the AVENGER system, which consists of eight STINGER missiles enclosed inside two missile pods. It is also combined with a remotely fired .50 cal machine gun that is mounted to a Humvee. You will learn how to prepare, operate, and fire weapons systems, and establish and maintain radio communications. Other duties include driving, vehicle maintenance, and securing battle positions. Job Duties • Movement and placement of the AVENGER weapons system in various locations and environments • Operate AVENGER electronic, hydraulic, radar, and mechanical components • Perform target engagement evaluations;...

The Avenger is the Army National Guard’s premier on-the-move defense turret that provides short-range air defense protection against air and land attacks. Lightweight, easily transportable, and equipped with eight powerful Stinger missiles, it’s up to the Avenger System Repairer to maintain the automated systems that keep the Avenger battle-ready. Job Duties • Determine malfunctions in electronics, electrical, and cryogenic assemblies; module and circuit elements • Maintain gyroscopes, sights, and other electro-optical fire control components • Repair and maintain missile mounts, platforms, and launch mechanisms • Test and adjust weapons firing, guidance, and launch systems • Inspect, test, and adjust components • Remove and replace defective line units Some of the Skills You’ll Learn • Use of electronic, electrical, and mechanical test equipment • Understanding of schematics, drawings, blueprints, and wiring...

Lightweight and highly mobile, the AVENGER is the Army National Guard’s premier shoot-on-the-move air defense weapon. An AVENGER Crewmember operates and maintains this surface-to-air missile system, designed to identify, track, and engage enemy targets like cruise missiles, and low-flying aircraft. The crewmember is responsible for operating and maintaining the AVENGER system, which consists of eight STINGER missiles enclosed inside two missile pods. It is also combined with a remotely fired .50 cal machine gun that is mounted to a Humvee. You will learn how to prepare, operate, and fire weapons systems, and establish and maintain radio communications. Other duties include driving, vehicle maintenance, and securing battle positions. Job Duties • Movement and placement of the AVENGER weapons system in various locations and environments • Operate AVENGER electronic, hydraulic, radar, and mechanical components • Perform target engagement evaluations;...

The Avenger is the Army National Guard’s premier on-the-move defense turret that provides short-range air defense protection against air and land attacks. Lightweight, easily transportable, and equipped with eight powerful Stinger missiles, it’s up to the Avenger System Repairer to maintain the automated systems that keep the Avenger battle-ready. Job Duties • Determine malfunctions in electronics, electrical, and cryogenic assemblies; module and circuit elements • Maintain gyroscopes, sights, and other electro-optical fire control components • Repair and maintain missile mounts, platforms, and launch mechanisms • Test and adjust weapons firing, guidance, and launch systems • Inspect, test, and adjust components • Remove and replace defective line units Some of the Skills You’ll Learn • Use of electronic, electrical, and mechanical test equipment • Understanding of schematics, drawings, blueprints, and wiring...

Be the first responder when a squad, section, or platoon tackles rough terrain in combat situations. As a Bridge Crewmember in the Army National Guard, your main responsibility will be to provide bridge and rafting support for dry and wet gap crossing operations. Other duties may include operating bridge truck and light vehicles, preparing bridge sites, assisting in rafting operations, and the assembly of military bridges. Job Duties • Assembly and maintenance of military fixed and float bridges Some of the Skills You’ll Learn • Road maintenance and repair • Rough carpentry and rigging • Use of hand and power tools Helpful Skills • Ability to use hand and power tools • Perform strenuous physical activities over long periods of time • Interest in construction and engineering • Enjoy working outdoors Through your training, you will develop skills in bridge construction and engineering, which will prepare you for a...

Be the first responder when a squad, section, or platoon tackles rough terrain in combat situations. As a Bridge Crewmember in the Army National Guard, your main responsibility will be to provide bridge and rafting support for dry and wet gap crossing operations. Other duties may include operating bridge truck and light vehicles, preparing bridge sites, assisting in rafting operations, and the assembly of military bridges. Job Duties • Assembly and maintenance of military fixed and float bridges Some of the Skills You’ll Learn • Road maintenance and repair • Rough carpentry and rigging • Use of hand and power tools Helpful Skills • Ability to use hand and power tools • Perform strenuous physical activities over long periods of time • Interest in construction and engineering • Enjoy working outdoors Through your training, you will develop skills in bridge construction and engineering, which will prepare you for a...

Fuel is one of the most vital components of the Army National Guard. It’s what keeps Soldiers pushing onward, and as a Petroleum Supply Specialist, you’ll make sure they’ll never run out. In this position, you will ensure the proper handling, storage, and shipment of petroleum-based products, such as oil, fuel, and compressed gas. Petroleum Supply Specialists primarily supervise and manage the reception, storage, and shipping of bulk or packaged petroleum products. This may include operating specialized pumping equipment to load trucks, ships, trains, and aircraft; selecting and submitting samples of petroleum-based products for testing; performing petroleum and water accounting activities; testing petroleum samples for contamination, repairing specialized equipment, and being knowledgeable about facility safety procedures and storage guidelines. As your skills increase, so will your responsibilities. Advanced Petroleum Supply Specialists take on management...

Before a road, airfield, or a building can be constructed, all obstacles must be removed from the site. As a Horizontal Construction Engineer in the Army National Guard, you’ll handle the heavy lifting to help your crew succeed. You’ll operate bulldozers, roadgraders, and other massive equipment to clear the way for construction. Your responsibilities will include leveling earth for runways and roadbeds, clearing, excavating, and digging areas of construction sites, spreading fill material, transporting heavy construction equipment with a tractor-trailer, moving heavy building materials with cranes, and assisting in performance of combat engineer missions. Job Duties • Analyze the information on grade stakes and placing them • Cut and spread fill material with scraper Some of the Skills You’ll Learn • Maintenance and repair of equipment • Identification of soil types and placement of grade stakes Helpful Skills •...

As a Light-Wheel Vehicle Mechanic for the Army National Guard you’ll ensure that anything that moves on wheels is ready to hit the road. In this role, you will primarily be responsible for supervising and performing maintenance and recovery operations on wheeled vehicles in the field and in the shop. Your duties will include inspecting, servicing, maintaining, repairing, testing, adjusting, and replacing of systems and components; performing recovery operations, and servicing electrical systems; including wiring harness and charging systems. Job Duties • Maintain wheeled vehicles associated trailers and material handling equipment systems • Service automotive electrical systems, including wiring harness, and starting and charging systems Helpful Skills • Interest in troubleshooting and repairing mechanical problems • Interest in automotive engines and how they work Through your training, you will develop the skills and experience to enjoy...

If you’ve ever considered a career in maintaining heavy machinery, join the Army National Guard as a Construction Vehicle Repairer and help pave the way for success. In this role, you will maintain trucks, bulldozers, power shovels, and other heavy equipment needed for construction operations. As a Construction Vehicle Repairer you will maintain and replace brake actuators, batteries, starter motors, alternators, mechanical fuel pumps, and hydraulic cylinders; adjust engine speed governor/valves, carburetors, dry-disc clutches, steering brakes, and fuel injector racks; charge suspension accumulators, transmission shift accumulators, and main hydraulic accumulators; troubleshoot problems in vehicle engines, electrical systems, steering, brakes, and suspensions; tune up and repair engines; replace or repair damaged body parts, hydraulic arms, shovels, and grader blades; and establish and follow maintenance schedules. Job Duties • Service drive shafts, universal...

Fuel is one of the most vital components of the Army National Guard. It’s what keeps Soldiers pushing onward, and as a Petroleum Supply Specialist, you’ll make sure they’ll never run out. In this position, you will ensure the proper handling, storage, and shipment of petroleum-based products, such as oil, fuel, and compressed gas. Petroleum Supply Specialists primarily supervise and manage the reception, storage, and shipping of bulk or packaged petroleum products. This may include operating specialized pumping equipment to load trucks, ships, trains, and aircraft; selecting and submitting samples of petroleum-based products for testing; performing petroleum and water accounting activities; testing petroleum samples for contamination, repairing specialized equipment, and being knowledgeable about facility safety procedures and storage guidelines. As your skills increase, so will your responsibilities. Advanced Petroleum Supply Specialists take on management...

Before a road, airfield, or a building can be constructed, all obstacles must be removed from the site. As a Horizontal Construction Engineer in the Army National Guard, you’ll handle the heavy lifting to help your crew succeed. You’ll operate bulldozers, roadgraders, and other massive equipment to clear the way for construction. Your responsibilities will include leveling earth for runways and roadbeds, clearing, excavating, and digging areas of construction sites, spreading fill material, transporting heavy construction equipment with a tractor-trailer, moving heavy building materials with cranes, and assisting in performance of combat engineer missions. Job Duties • Analyze the information on grade stakes and placing them • Cut and spread fill material with scraper Some of the Skills You’ll Learn • Maintenance and repair of equipment • Identification of soil types and placement of grade stakes Helpful Skills •...

As a Light-Wheel Vehicle Mechanic for the Army National Guard you’ll ensure that anything that moves on wheels is ready to hit the road. In this role, you will primarily be responsible for supervising and performing maintenance and recovery operations on wheeled vehicles in the field and in the shop. Your duties will include inspecting, servicing, maintaining, repairing, testing, adjusting, and replacing of systems and components; performing recovery operations, and servicing electrical systems; including wiring harness and charging systems. Job Duties • Maintain wheeled vehicles associated trailers and material handling equipment systems • Service automotive electrical systems, including wiring harness, and starting and charging systems Helpful Skills • Interest in troubleshooting and repairing mechanical problems • Interest in automotive engines and how they work Through your training, you will develop the skills and experience to enjoy...

If you’ve ever considered a career in maintaining heavy machinery, join the Army National Guard as a Construction Vehicle Repairer and help pave the way for success. In this role, you will maintain trucks, bulldozers, power shovels, and other heavy equipment needed for construction operations. As a Construction Vehicle Repairer you will maintain and replace brake actuators, batteries, starter motors, alternators, mechanical fuel pumps, and hydraulic cylinders; adjust engine speed governor/valves, carburetors, dry-disc clutches, steering brakes, and fuel injector racks; charge suspension accumulators, transmission shift accumulators, and main hydraulic accumulators; troubleshoot problems in vehicle engines, electrical systems, steering, brakes, and suspensions; tune up and repair engines; replace or repair damaged body parts, hydraulic arms, shovels, and grader blades; and establish and follow maintenance schedules. Job Duties • Service drive shafts, universal...